Quartz Feldspar wet process production line
Quartz Feldspar wet processing technology
The process is a common processing technology for wet process glass
sand.firstly, Quartz fall under the hopper,quartz stone is broken
into the coarse material after primary crushing, and be transported
by belt conveyor for further crushing to the second crushing
machine, then the smaller stone will be taken into the vibrating
screen for screening out two type size quartz stones, exceed size
stone will be returned to crushing machine again.
Sieved material into the rod milling machine, Materials from the
rod milling machine to classify through the cylinder screen. in the
sieve to return to the rod milling machine, Sieved material to
eliminate the tramp iron by high intensity magnetic separator, and
then into the Vertical Ring High Gradient Magnetic Separator to
remove the residual mechanical iron and associated iron , usually
after two procedures of separating, quartz sand iron content can
down to below 0.07%,
Finally ,the qualified pulp through the hydraulic desliming slot to
take off the mud, and then dehydrated to become the qualified
quartz sand products. In the production line, Rod mill and the High
Gradient Magnetic Separator is one of the core equipment, this
production line is a high degree of automation, low operation cost,
high crushing efficiency, energy saving, large output, less
pollution, easy maintenance, the final quartz sand has the uniform
size, good grain shape and reasonable size distribution ,which can
meet the national standards of construction machine-made sand.
Advantages:
1. Mature technology, energy conservation and environmental
protection! High purity without pollution. Adopting reasonable
technological equipment, it can save power consumption and realize
zero discharge of sewage and dust.
2. The equipment is simple to operate and highly automatic. The
production line is elaborately designed with advanced circuit
control system, which not only saves manpower but also lowers the
operating threshold of the production line.
3. Large output, uniform product particle size and higher sand
forming rate, the whole production process is graded by cylinder
screen, blocking and classifier for many times, which not only
improves the efficiency of the production line, but also reduces
the loss of raw ore and controls the content of tail powder.
4.High quality products can effectively reduce the content of
quartz sand iron. We have rich experience in quartz sand production
line. The whole process is not only equipped with advanced iron
removal equipment, but also controlled at the source to reduce sand
pollution in the process as much as possible.
